Updated October 2026
Logan Village is an old township with acreage spreading around it, between Jimboomba and the newer development at Yarrabilba. That gives it two kinds of pool: pools behind the older village houses on smaller blocks with tight access, and pools on the surrounding rural properties where there is room for a truck and the nearest neighbour is a paddock away. The work is the same in both cases. The access, the logistics and therefore the price are not.
We connect you with experienced, insured local pool renovators who work Logan Village and the country around it, and who will price the access they can actually see.
Two kinds of block, two kinds of quote
On an older village block the constraint is the one that drives up suburban quotes: a narrow side path, a fence and a service line in the way, and no route for anything with wheels and an engine. Everything moves by hand. On the acreage around the village the gate is usually wide enough for a tipper and a bobcat, material can be staged beside the pool, and the labour component of the same resurface drops accordingly. A quote given without someone seeing which one you have is a guess. Tell the renovator the side access width, the gate width and whether there are steps.
Bundling is the rural discipline
Out along this corridor the trip is a real part of the cost, so the renovation that gets done well is the one planned completely before it starts. One delivery, consecutive stages, a crew that stays on site rather than returning weekly, and every decision on finish, tile and coping made in advance. The payoff is that the empty-pool jobs share their setup costs: new waterline tiles fitted during a resurface cost far less than the same tiles a year later, and the same holds for fittings, lights and pipework. See tiling and coping and equipment upgrades.
Draining and refilling
Plenty of acreage blocks out this way are not connected to reticulated services, and the village blocks and the rural blocks can differ from one another, so confirm your own address with Logan Water rather than assuming. Where there is a connection, pool water should be discharged in line with the local water authority's requirements rather than straight to the street stormwater. Where there is not, the drain-down is managed on the property and the refill generally means carted water, booked at the same time as the renovation rather than once the pool is sitting empty.
Barriers on a village block
Older village pools fail inspections for the same handful of reasons: a fence built to the standard of its day and never reassessed, the garden grown up around it, a latch worn past self-latching, height lost to built-up beds or decking. All of it is a day or two of trade work. The certificate is issued only by a pool safety inspector licensed by the QBCC, never by this site and never by the contractor who repairs the barrier, and a non-shared pool certificate runs two years. If you are putting a house with its own pool onto a new lease, that certificate must be in effect before the tenancy agreement is entered into. See fencing and compliance.
Frequently asked questions
What does a resurface cost here?
Guide pricing only. A pebble resurface on a standard family pool typically runs roughly $8,000 to $15,000, with acreage pools above that on area alone and village blocks with hand-only access toward the upper end. The cost guide explains the drivers.
Can the whole job be done in one stretch?
That is the aim out here, and it is worth insisting on. Consecutive stages with one setup beats repeat trips for both cost and schedule.
My pool has not run in years. Is it salvageable?
Usually, yes. Most long-dormant pools are structurally sound and need the interior rather than a chemical campaign. Get it looked at drained before anyone sells you a recovery.
Tell us what the pool needs. Get a fast quote
We also cover nearby Jimboomba and Yarrabilba.