Pool resurfacing in Logan
Updated October 2026
If your pool interior feels rough underfoot, stains no matter how well you balance the water, or sheds pebbles into the skimmer basket, the surface has reached the end of its life. Resurfacing is the bread and butter of the renovators we work with, and Logan gives them plenty of work. The belt built through the 1980s and 1990s in the north-east, from Springwood and Daisy Hill out to Shailer Park, Cornubia and Loganholme, is where most of the region's in-ground pools were put in, and plenty of those interiors are now worn out. Logan Pool Renovations connects you with experienced, insured local pool renovators who strip the old interior and apply a new finish that should last decades.
In Queensland, building work valued over $3,300 generally requires a QBCC licensed contractor, which covers a resurface on most pools. Work is referred to independent contractors, licensed where the work requires it. Ask to see the licence and check it on the QBCC register before work starts.
Signs your pool needs resurfacing
- Rough, chalky or drummy patches you can feel with your hand
- Pebbles or render collecting in the skimmer or on the floor
- Stains and black spot algae that return after every treatment
- Rust spots or crack lines showing through the surface
- A finish past 15 to 20 years old, which covers most of the original interiors put in through the 1980s and 1990s
A tired surface is more than cosmetic. Rough render grabs algae, chews through chemicals and scrapes feet, and exposed patches let water reach the concrete shell underneath.
Finish options
Pebble. Still the workhorse. Modern exposed pebble blends are smaller, smoother and come in far more colours than the original pebblecrete poured decades ago. Durable and forgiving in salt pools.
Quartz and glass bead. A finer, smoother finish with more colour depth. Costs more than plain pebble but feels noticeably better underfoot and gives that modern blue-water look.
Fibreglass lining. A fibreglass layer applied over the existing shell. A solid option where the concrete has movement cracks, because the lining bridges small cracks that would telegraph through a cement-based finish.
Paint is the budget route and has its own page at pool painting, because it is a different job with a different lifespan.
What resurfacing costs
As a guide only, resurfacing a standard family pool with an exposed pebble finish typically runs somewhere between $8,000 and $15,000, with premium quartz or glass bead finishes running higher, in some cases beyond $20,000 on larger pools. Fibreglass lining usually lands in a similar band. Access, pool size and how much preparation the old shell needs all move the price, which is why the renovators we work with quote after seeing the pool. The pool renovation cost guide breaks the numbers down further.
What the job involves
The pool is drained, which takes a little planning here because pool water should be discharged in line with the local water authority's requirements rather than straight into the street stormwater, and Logan Water handles water and wastewater across the sewered parts of the city as Logan City Council's own business unit. On an acreage block that is not connected, the drain-down is managed on the property instead. The old surface is prepared or stripped back, cracks and hollow spots are repaired, waterline tiles are replaced or kept, and the new finish is applied and cured. Most resurfacing jobs run one to two weeks door to door, weather permitting, and in a wet summer that caveat earns its keep. Many owners bundle new waterline tiling and coping or an equipment upgrade into the same drain-down, since the pool is already empty.
Sloped blocks and the hand-barrow problem
One local wrinkle worth knowing. Through the hilly north-east, the pool often sits on a cut pad with a retaining wall behind it and steps as the only route in. Nothing with wheels and an engine gets down there, so the old surface comes out and the new material goes in by hand. That is routine work for a renovator who knows the belt, and it needs to be priced honestly rather than discovered on day one. On the low-lying river flats in the south-east the opposite caution applies: an empty concrete shell in saturated ground after a wet run can float, so a renovator who works that ground checks the hydrostatic valve and times the drain-down around the weather.
Why pools wear here
Salt pools are the norm, and salt is hard on cement-based finishes. Add a long swim season and hard subtropical UV, and you get a region where resurfacing is due in a large share of backyards. A pool built with the house in Springwood or Daisy Hill in 1988 is now on at least its second surface, or overdue for it.
Frequently asked questions
How long does a new pool surface last?
A quality pebble or quartz finish, kept in balanced water, commonly lasts 15 to 20 years. Paint lasts a fraction of that, which is why it is the cheaper job.
Can you resurface over the old finish?
Sometimes. If the old surface is sound it can be prepared and coated over. If it is drummy or delaminating it has to come off first, which adds labour. The quote will say which applies to your pool.
Do I need approval to resurface?
Like-for-like resurfacing is generally treated as repair and maintenance rather than new pool building work, but your barrier must still comply once work is done. Check with Logan City Council or a private building certifier if your job includes structural changes or excavation.
Is resurfacing worth it before selling?
Often, yes. A fresh interior transforms how a pool presents, and buyers discount hard for a stained, rough pool. Deal with the barrier early so the pool safety certificate does not hold up the sale.